Seco MS2050 milling grades optimized for titanium machining
Seco has increased the versatility of its MS2050 milling grade with new variations that bring optimized cutting performance to shops processing parts from titanium and high chromium content steels. The latest additions span a wide scope of insert sizes, radii and geometries along with special coating technology.Seco has increased the versatility of its MS2050 milling grade with variations that bring optimized cutting performance to shops processing parts from titanium and high chromium content steels. The latest additions span a wide scope of insert sizes, radii and geometries along with special coating technology.
The grade’s silver-colored PVD uni-coating provides enhanced heat-resistant capabilities as well as virtually eliminates the occurrence of built-up edge when cutting sticky materials such as titanium. And with the absence of built-up edge, the inserts last approximately 50 percent longer than existing products, which provides users with reduced tool costs.
Applicable for use with the company’s Turbo 10, Helical T4-08 and Highfeed cutters, the new MS2050 insert grades are available in a radii selection from 0.4 mm to 6.3 mm as well as positive geometries that can perform productive shoulder, face, copy and high-feed milling operations.
For additional information on this highly wear-resistant grade, please contact a local Seco representative or visit www.secotools.com/ms2050.
