REDUCE YOUR COST PER THREADED HOLE IN CAST IRON
Discover the product range
Optimizing threading operations in cast iron requires a great deal of trial and error, often with plenty of broken taps and poor cycle times along the way. Control cutting forces, keep chips moving and speed up your threading operations by up to 50% with the new line of threading taps for ISO K materials from Seco. And thanks to a newly redesigned geometry and grade combination, you can take advantage of these taps’ higher performance without sacrificing tool life.
Your challenge: Slow cast iron threading operations are slowing down your shop’s production.
The Seco solution: Achieve the highest level of tapping performance – and the lowest cost per threaded hole – thanks to reoptimized geometries, a greater number of flutes and reduced friction.
Threading can be a delicate operation, one where chips and cutting forces must be handled with extreme care for effective process security. Handle all these challenges with ease thanks to the new ISO K threading taps’ advanced design. Using a specialized process that results in a harder, high-cobalt tool-steel substrate, Seco has also applied a new smoothed TiAlN coating for a smooth, hard surface that’s highly resistant to breakage. Best of all, this improved reliability can be applied in any coolant environment, whether machining dry, wet or through the use of MQL technology.
Your challenge: Poorly controlled, oversized chips cause scratching, tool wear and a lack of process security.
The Seco solution: Newly optimized flute shapes and a back chamfer make it easy to evacuate chips, even in deep holes.
Threading has a reputation for sensitivity, but there’s no need to be gentle with the new cast iron threading taps. A forgiving geometry, including a greater number of flutes and optimized grades, provides great results even with suboptimal cutting parameters. Meanwhile, additional reliefs on the threads and chamfer serve to reduce contact between the taps and workpiece, while the additional back chamfer allows for threading in deep holes with confidence.
Your challenge: Unpredictable tap tool life leads to poor performance and downtime.
The Seco solution: An increased number of flutes, improved hardness and greater chamfer and thread reliefs secure processes and prevent unexpected breakage.
Discover the product range
Contact Us
Related content
ISO K Threading Taps - New Generation vs Old Generation Comparison
FAQ - Elevate Thread Quality and Cost Effectiveness with Seco's Experts
Poster - Threading
Factsheet - Seco Taps
Thread Tapping
Threading Taps
T35-H Threading Taps
Seco Nanojet Reamers: reliable precision
Optimize Multi-Task Machining Coolant And Results
Seco X-Tra Long Solid Carbide Drills – 40xD-60xD
Seco CH1050/CH2581 PCBN Hard Part Turning Inserts
JS720 Solid End Mills addition
Seco Digital Tool Assembly: quick, accurate data
Easy setup with Seco Digital Axial Boring Heads
JH730 Solid End Mills addition
Square T4-12 Upgrades
Universal Drills
Seco JSE510 Solid End Mill series
MF2 Chipbreaker on Round RCMT/RCGT Inserts
TURBO 16 SQUARE SHOULDER MILLING CUTTERS
Seco Taps
New Seco Thread Cutting and Forming Taps Line to Provide Versatility and Cost-Effective Solutions
Machining Navigator / Catalog Threading
WEBINAR - UNLEASH YOUR TAPPING POTENTIAL
Enhancing Thread Tapping: Choosing the Perfect Tool for Success
Video: Redesigned Threading taps for better threading in cast iron
Product Range Presentation - Seco Taps
Threading six different materials with one tap | Seco tools
JETI conversion Grooving and Parting-off Capto
HIGH FEED SQUARE CUT SIZE 14 INSERT
Seco Machine Library
Seco Helical LN4-11 Milling Cutter
Guillaume Bourderon appointed Sales Unit Market Manager France
JETI CONVERSION GROOVING AND PARTING-OFF
Seco X2 System for Small Part Machining
JETI Toolholder for RCMT/RCGT Turning Inserts
Seco S43/S45/S46 Solid End Mills for Aluminum
Turbo 12 & 18 Chip Splitter Inserts
Seco C-Series General Purpose End Mills
Factsheet - T35-H Threading Taps
Seco X-Head Exchangeable End Mill System
Steadyline® ø25mm (1”) series
New MP Milling Grades
Seco News Summary 2022.2
Unleash your drilling potential
JETI ISO Toolholder range extension
THREADMASTER™ ISO-S THREADING TAPS
JM100 MINI END MILLS
Modular QC (quick-change) toolholder for small part machining
SECO-CAPTO TOOLHOLDERS & CASSETTES FOR ADVANCED MATERIAL
XP08 ALUMINIUM ROUTER
RANGE EXTENSION OF SHELL MILL HOLDERS, SMALL FACE & SIDE LOCK HOLDERS IMPROVEMENTS
COMBIMASTER™ M20
EASYSHRINK EVO
UNIVERSAL DRILLS 8XD AND 12XD
SECO ROUND 10 AND 16 COPY MILLING INSERTS
DOUBLE TURBO 16
Threadmaster Taps - Forming
R220.88 WITH SNMU INSERTS
TTP2050
DOUBLE QUATTROMILL™ 14
Threadmaster Taps – Through Holes
Threadmaster Taps – Blind Holes
DOUBLE OCTOMILL™
DOUBLE QUATTROMILL™ 22